UA-92785066-1

Vehicle accidents are most common if the driving is inadequate. These happen on most factors if the driver is drowsy or if he is alcoholic. Driver drowsiness is recognized as an important factor in the vehicle accidents.


It was demonstrated that driving performance deteriorates with increased drowsiness with resulting crashes constituting more than 20% of all vehicle accidents. But the life lost once cannot be re-winded. Advanced technology offers some hope avoid these up to some extent.


This project involves measure and controls the eye blink using IR sensor. The IR transmitter is used to transmit the infrared rays in our eye. The IR receiver is used to receive the reflected infrared rays of eye. If the eye is closed means the output of IR receiver is high otherwise the IR receiver output is low. This to know the eye is closing or opening position. This output is give to logic circuit to indicate the alarm.


This project helps in controlling accidents due to unconsciousness through Eye blink. Here one eye blink sensor is fixed in vehicle where if driver looses consciousness, then it is indicate through alarm.


Hardware


S. No.

Part

Quantity

1.

PCB Prototype

1

2.

IR sensor

2

3.

Buzzer

1

4.

Goggle

1

5.

Atmega8/328 IC

1

6.

9 volt Battery

1

7.

Some Other Components



Software

1. Arduino IDE

2. AVR Dude

3. AVR Studio






Write a review

Note: HTML is not translated!
    Bad           Good

Eye Blink Accident detector Alarm

  • Product Code: EYEBLINKALARM
  • Availability: In Stock
  • ₹3,500.00


Tags: Eye Blink, Eye, Blink, IR, Sensor, Arduino, Atmega, Accident, Alarm